When you receive the cof bonding machine.
1.If the glass is broken as received, please contact us immediately.
Dimensions of the glass. 1800mm*800*12mm
The thickness must be 12mm.
2.All the parameters are well set before shipping. Please do not change any setting of the machine. When you get the machine, please contact us directly.
3.Machine voltage: 220V.
4.Connect the air compressor and test the machine before using it by following the instruction sheet we send to you.
5.Bonding Head Pressure
(1)When the machine is not in use, head upwards pressure is 0.4mpa. Head downwards pressure is 0 mpa.
(2)Position pressure: only when you press “Head locate” button. Positioning press is around 0.2 mpa
(3)When the machine is in use, head upwards pressure is 0 mpa. Head downwards pressure is 0.4 mpa.
6.Glass Panel Bonding Parameters (As Picture)
7.PCB bonding Parameters (As Picture)
8.Button to adjust the bonding head if it lowers down fast. Not recommend adjusting it. please contact us directly.