- Check if the inlet air pressure of the steel mesh cleaning machine is within the appropriate range (0.45MPa – 0.65MPa).
- Use the automatic liquid adding system of the steel mesh cleaning machine DEZ-C730 to add sufficient cleaning solvent to the liquid storage tank.
- Place the steel mesh to be cleaned into the equipment box. After confirming the placement, close the cleaning chamber door.
- Set the cleaning time and drying time according to the degree of contamination of the steel mesh. Generally, the cleaning time is set within the range of 240-500 seconds.
- Click the “Start” button. At this point, the equipment will perform cleaning and drying according to the previously set time.
- When the cleaning is complete, the equipment will sound an automatic alarm. Open the steel mesh cleaning machine, remove the steel mesh, and the cleaning process is complete.
The above is the process of cleaning steel mesh with the DEZ-C730 steel mesh cleaning machine, which is simple to operate and one-touch cleaning. If there are any unclear points, you can consult the online customer service for detailed understanding of the operation of the steel mesh cleaning machine through instructional videos.
