BGA rework station is a device used in the electronic repair and manufacturing industries, employed for repairing or reinstalling BGA chips. Its purpose is to enhance the efficiency and quality of electronic manufacturing and repair processes. By utilizing a BGA rework station, it is possible to effectively reduce quality issues caused by poor chip soldering and improve product reliability and stability.
A typical BGA rework station consists of heating systems, temperature control systems, image display systems, operating platforms, etc. The heating system primarily heats the BGA chip using infrared rays, hot air, or heating plates to separate it from the substrate. The temperature control system monitors the temperature of the heating area in real-time using sensors and adjusts the heating power through a controller to ensure the stability and controllability of the heating process. The image display system allows operators to observe the status of the chip and substrate clearly for precise operations. The operating platform facilitates the movement and rotation of the BGA chip for optimal heating effects.
The principle of a BGA rework station is mainly based on heating the BGA chip using the heating system to separate it from the substrate, followed by using a suction nozzle to remove the chip for replacement or repair. During the heating process, it is essential to control the heating time and temperature to avoid unnecessary damage to the chip and substrate. Moreover, care must be taken regarding the force and angle when removing the chip with the suction nozzle to prevent chip damage.
As an electronic repair device, the BGA rework station is primarily used to address BGA chip issues on circuit boards. Therefore, its application is mainly focused on the electronic repair and manufacturing industries. In the electronic repair industry, the BGA rework station can be utilized to repair various types of electronic devices such as phones, computers, tablets, etc., providing precise repair solutions for BGA chip soldering issues. In the electronic manufacturing industry, the BGA rework station can be used to inspect product quality and reliability, thereby enhancing production efficiency and reducing product loss rates.