When the FPC is bent, the types of stress on both sides of the heart line are different. The inner side of the curved surface is pressure and the outer side is tension. The size of the stress is related to the thickness of the FPC and the bending radius. Excessive stress will lead to…

1. Pull up the “head positioning” button 2. press “Manual alignment” to lower down the head 3. Turn the button to adjust the bonding head till line 1 and line 2 become just only one line.

Step one press the “Power Switch” to start the screen press. Step two adjust the parameters to adjust the various parameters of the machine, including the positioning air pressure (recommended to adjust to 0.04); the onset of the sword (it is recommended to adjust to 0.32); Step three clean and clean the crystal bar, the…